FREEEEEEcad

Tutorial was easy. I had no troubles. For the second one, I did a simple design. I made the hole for the cord bigger than necessary to possibly account for any shape of charger heads that need to thread into the design. As for the third object, I did a simple top and bottom case with a tolerance of 0.02 mm. From my experience, you need to force the lid onto the body, possibly by hammering or leaning with your body weight if you aren’t a small person like I am. Because the tolerance is so small, it becomes a force fit. To take off the lid, you need to pry it open with a screwdriver. The assignment did not say that they needed to be taken apart again, so I concluded that my past experiences with tolerances was the easiest path for this assignment.